Ampeg manual Technical Specifications, SVPCL Bass Preamp

SVPCL Bass Preamp

Technical Specifications

TONE CONTROL RANGE
ULTRA LOW:	1 = off; 2 = -3dB @ 30Hz; 3 = -3dB @ 200Hz; 4 = -20dB @ 600Hz; 5 = +9dB @ 30Hz
ULTRA HIGH:	+16dB @ 8kHz
BRIGHT:	+6dB @ 3kHz
BASS:	+17dB / -13dB @ 20Hz
MID FREQ:	+/-20dB @ 220Hz, 450Hz, 800Hz, 1.6kHz, or 3kHz
TREBLE:	+15dB / -20dB @ 7kHz
GAIN	23dB
SIGNAL TO NOISE RATIO	80dB typical
TUBE COMPLEMENT	(2) 12AX7, (2) 12AU7
POWER REQUIREMENTS	120VAC, 60Hz, 25VA
	100/120VAC, 50/60Hz, 25VA
	220-240VAC, 50/60Hz, 25VA
SIZE (W x H x D) AND WEIGHT	19” W x 1.75” H x 9.25” D, 9 lbs.

Ampeg reserves the right to change specifications without notice.

Declaration Of Conformity

#36, Effective 01-01-2001

Manufacturer’s Name:	SLM Electronics
Production Facility:	1901	Congressional Drive, St. Louis, MO 63146, USA
Production Facility:	700 Hwy 202 W, Yellville, AR 72687, USA
Shipping Facility:	1400	Ferguson Ave., St. Louis, MO 63133, USA
Office Facility:	1400	Ferguson Ave., St. Louis, MO 63133, USA
Product Type:	Audio Amplifier
Complies with the following Standards:
Safety:	EN60065, E60065, C22.2, UL6500 and/or UL813
EMC:	Directive 89/336/EEC, EN55103, EN55013, EN61000,
	and/or FCC 47CFR 15B clA

Supplementary information provided by: SLM Electronics - R & D Engineering

1901 Congressional Drive, St Louis, MO 63146, USA

Tel.: 314-569-0141, Fax: 314-569-0175

www.ampeg.com

Ampeg is proudly Made in America. ©2004 SLM Electronics, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.

P/N 47-836-01 • 012704