Amplifier Tech AT2000 Connecting Your Amplifier, Getting to Know the Rear Panel, DSpeaker Outputs

Getting to Know the Rear Panel

AXLR Balanced Audio Inputs

Use the BALANCED INPUT jacks to connect to the outputs of a preamplifier or other control device with XLR outputs.

BUnbalanced Audio Inputs

Use the UNBALANCED INPUT jacks to connect to the ouputs of a preamplifier, receiver with preout connections,

CD player, or other control devices.

CRemote Trigger Input

Use the REMOTE TRIGGER jack to connect to a compatible preamplifier, source device, or other product with a 3.3-24VDC output.

DProduct Serial Number

Write this number in the space provided on page 10 for future reference.

AB

DSpeaker Outputs

Use the OUTPUT binding posts to connect the amplifier to your speakers; red for positive, black for negative.

EAC Input

Use the included power cord to connect your amplifier to an AC power source.

FMaster Power Switch

Turns the current to the amplifier on or off.

NOTE: The picture below is an AT2007 seven-channel model. It differs from the AT3007 only in the extra space on the panel. Other models ranging from two to six channels will only

have two to six sets of balanced audio inputs, unbalanced audio inputs and speaker outputs.

C

DE

Page 4

F G

Connecting Your Amplifier

When making connections between any source components and the amplifier, or when making connections to any speaker, be certain that both the input devices and the amplifier are turned off. To assure that there will be no unwanted signal transients that can damage equipment or speakers, it is always best to unplug all equipment before making any connections.