AmpliVox S1610, S1600 owner manual Rf Interference

Models: S1600 S1610

1 8
Download 8 pages 31.02 Kb
Page 2
Image 2
RF INTERFERENCE

The AmpliVox S1600 wireless microphone system is compact, lightweight and compatible with all AmpliVox and Perma Power Sound Systems currently being produced or that were produced since 1961. The S1600 operates in an authorized VHF band and has a useful range of up to 200’ in line-of sight applications.

Each S1600 system operates on two crystal-controlled, switch- selectable frequencies for clear clean transmission.

“A” Channel

“B” Channel

T6: 171.105 MHz

T7: 171.845 MHz

The frequency appears on the back of each unit. Both transmitter and receiver must have the same, and both units must be set to either “A” or “B.”

Note that two transmitters on the same frequency will not work with one receiver. However two or more receivers will work with the same transmitter

The S1600 is offered with a choice of two microphones: The S2030 miniature cardioid condenser lapel microphone or the S2040 headset microphone.

Before use, make certain you understand the function and operation of the system.

RF INTERFERENCE

Please note that wireless frequencies are shared with other radio services. According to the Federal Communications Commission regulations, “Wireless microphone operations are unprotected from interference from other licensed operations in the band. If any interference is received by any Government or non-Government operation, the wireless microphone must cease operation…”

If you need assistance with operation of frequency selection, please contact your dealer or AmpliVox.

Additionally There are models available for use in Canada.

Page 2
Image 2
AmpliVox S1610, S1600 owner manual Rf Interference