AmpliVox SW227 manual Control Panel, Made In Usa, call, customerservice@

CONTROL PANEL

TRANSMITTER

FREQ PWR

INTERNAL ON

WIRELESS

MIC INPUT

JACK

INTERNAL WIRELESS

RECEIVER

MIC RECEIVER

A B OFF ON

POWER ON INDICATOR

WP

MAIN POWER

OFF

ON

O

SWITCH

POWER ON/OFF SWITCH

DC IN

E

ON

CHANNEL SELECTOR SWITCH

POWER INPUT

R

M

EXTEND YOUR

either A or B. Both the microphone transmitter and the amplifier have

VOICE WITH

AUX OUT

A

to be on the same frequency for the wireless mic to work proplerly. If

AUX OUT

you encounter interference, switch frequencies. Rotate VOLUME control

knob on the amplifier to obtain desired loudness level throughout the

M

coverage area.

MASTER VOLUME

I

The microphone has an ON/OFF switch. it should always be in the OFF

OC

position until the main power is ON and you are ready to speak.

VOLUME

P P

2

The VHF wireless microphone system is compact, lightweight and

H

CONDENSER

1

S

O

compatible with all AmpliVox VHF wireless systems. The wireless mic

MICROPHONE INPUTS

N

WL

operates in an authorized VHF band and has a useful range of up to

3

DYNAMIC

E

2

200-ft. in line-of-sight applications. Each system operates on two crystal-

WIRELESS

2

controlled, switch selectable frequencies for clear clean transmission.

I

A

5

“A” Channel

“B” Channel

V

AUXILIARY VOLUME

IU

T6: 171.105 MHz

T7: 171.845

X

wireless mic set up

LINE IN

VOLUME

L

O

The frequency appears on the back of each unit. Both transmitter and

LINE IN

I

receiver must have the same, and both units must be set to either “A” or

A

R

“B.” Note that two transmitters on the same frequency will not work with

TONE CONTROL

TONE

Y X

one receiver. However two or more receivers will work with the same

PORTABLE

transmitter. Before use, make certain you understand the function and

O

SOUND

operation of the system.

SYSTEMS

main POWER switch

SPEAKER JACK

L

U

T

The MAIN POWER switch is located on the control panel. Flip the rocker

SPEAKERS

P

switch to the ON position. The red light next to the switch will light up

LINE OUT

U

T

showing that the power is on.

**CONNECT S1670

LINE OUT

HERE

R

DC INPUT

SPEAKER JACK

Connection for an optional external power adapter.

MADE IN USA

AUX OUT

1-800-267-5486 WWW.AMPLI.COM

Power source for 12 to 15V DC accessories.

MASTER VOLUME

Controls the volume level of the microphones, including the wireless

OUTPUT

microphones.

The LINE OUT provision may be used for connecting to an input on

MICROPHONE INPUTS

a recording device, such as a computer sound card, MP3 recorder,

There are three microphone inputs, which can be used simultaneously:

tape recorder, or similar device. The LINE OUT can also be used for a

DYNAMIC - for standard dynamic microphones, 1/4 in.

number of other applications, such as connecting to a house system, or

CONDENSER - for electret or condenser microphones, which require

connecting to one of our wireless speaker transmitters, for example.

phantom power (supplied from the amplifier) 3.5 mm

EXTERNAL SPEAKERS

WIRELESS - accepts output from an external wireless microphone

Two separately amplified speaker jacks allow you to use one or two

S1201, S1290, or any of our horn speakers for additional sound power.

receiver

Note: when using a stereo AUX source with

AUXILIARY

NEED HELP?

a single speaker, only one of the stereo

The LINE IN provision is for connecting an external audio source such

call 800-267-5486

channels will be heard. However, all MIC

as a CD player, tape player, MP3 player or computer sound card This

inputs are heard equally on both channels.

or 847-498-9000

input also serves as a provision for connecting additional wireless

email:

microphone receivers, audio mixers and other line level audio sources.

RF INTERFERENCE

customerservice@

Separate VOLUME and TONE control knobs allow flexibility in controlling

Please note that wireless frequencies are

ampli.com

the sound quality as well as balancing the auxiliary source with the

shared with other radio services. According

microphones.

to the Federal Communications Commission

SW227

3