8051 5.1 Compressor | User Guide |
EXT Control
The EXT buttons provide an insert point in the control voltage signal, after the bias control but before routing back to the channels.
During normal operation the control voltages generated by the sidechain are internally connected to the CV Link switched for routing back to the channels. In EXT mode the control voltage is taken from the rear connector instead of the sidechain outputs, allowing the unit to be slaved from a second 8051 or 33609.
There is no EXT Control with 88R(S) console mounted compressors (AM5052 & AM5265).
Pin | Function |
|
|
1 | 0V Reference |
|
|
9 | CV send, sidechain A |
|
|
12 | Remote |
|
|
5 | CV send, sidechain B |
|
|
13 | CV return, sidechain B |
|
|
14 | CV return, sidechain A |
|
|
15 | 24V Reference |
|
|
Short to pin 12 to pin 1 to take the unit out of standby mode remotely.
CONTROL |
|
|
|
|
|
|
|
VOLTAGE I/O | KEY INPUT | INPUT 6 | INPUT 5 | INPUT 4 | INPUT 3 | INPUT 2 | INPUT 1 |
| |||||||
| PUSH | PUSH | PUSH | PUSH | PUSH | PUSH | PUSH |
WARNING |
|
|
|
|
|
|
|
DISCONNECT MAINS LEAD |
|
|
|
|
|
|
|
TO ISOLATE UNIT. |
|
|
|
|
|
|
|
NO USER SERVICEABLE | CHASSIS INTERNAL | OUTPUT 6 | OUTPUT 5 | OUTPUT 4 | OUTPUT 3 | OUTPUT 2 | OUTPUT 1 |
PARTS INSIDE | 0V | ||||||
HAZARDOUS VOLTAGES INSIDE | PLEASE SEE |
|
|
|
|
|
|
REFER TO MANUALS | MANUAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
FUSE 1.6A A/S CERAMIC
INPUT VOLTAGE
INPUT FREQUENCY
Issue 2 | Page 9 |