![](/images/new-backgrounds/1122134/12213435x1.webp)
3.Rotate the Green Printhead latch
4.Rotate the Side Access Door down to allow the ribbon to be loaded under the printhead module. This will allow you to slide the ribbon under the printhead without having to thread it under the module.
Printhead Latch
Side Access Latch
Figure 11 - Printhead Latch and Side Access Cover
5.Unwrap the ribbon and place the Ribbon Supply Roll on the Ribbon Supply Spindle located towards back of printer.
Ribbon Supply
Figure 12 - Ribbon Supply
Fastmark 6000 Series | User's Guide 17 |