Installation Guide
Solecis AVB-DA-RGBHV-ST-0102
Overview
The Solecis
The buffered input provides for a local monitor loop through and main output for onward connection to monitors, projectors and plasma displays. The main output features 75 ohm drive for connection to long cable runs and TTL Sync restore for total compatibility.
The
|
|
|
|
|
| Activity LED | ||
|
|
|
|
|
| green = signal source present | ||
|
|
|
|
|
| red = unit powered but not | ||
Audio IN |
| Video IN |
|
|
| connected to RGBHV source | ||
|
|
|
|
|
| Monitor IN | ||
(front) |
|
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
(rear) | Video OUT |
| Audio OUT |
|
|
| |
|
|
|
| ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
FIG. 1 Solecis | |||||||
Product Specifications | |||||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
RGB Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Number: |
| 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Connector: |
| ||||||
|
|
|
|
|
|
|
|
Level: |
| Analog | |||||
|
|
|
|
|
|
|
|
Max Level: |
| 1V | |||||
|
|
|
|
|
|
|
|
Impedance: |
| 75 ohm | |||||
|
|
|
|
|
|
|
|
Sync Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Type: |
| Analogue or TTL | |||||
|
|
|
|
|
|
|
|
Impedance: |
| 470 ohm | |||||
|
|
|
|
|
|
|
|
RGB Video Bandwidth: |
| 300MHz | |||||
|
|
|
|
|
|
|
|
RGB Return Loss: |
| ||||||
|
|
|
|
|
|
|
|
Sync Processing: |
| None | |||||
|
|
|
|
|
|
|
|
RGB Output |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Number: |
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Connectors: |
| ||||||
|
|
|
|
|
|
|
|
Level: |
| Analog | |||||
|
|
|
|
|
|
|
|
Gain: |
| Unity | |||||
|
|
|
|
|
|
|
|
Impedance: |
| 75 ohm | |||||
|
|
|
|
|
|
|
|
Sync Output
Level: | TTL |
|
|
Gain: | TTL restore |
|
|
Impedance: | 75 ohm |
|
|
Audio: | Balanced/Unbalanced audio via 3.5mm stereo socket to |
| phoenix |
|
|
Power |
|
|
|
Input Voltage: | 9V |
|
|
Connector: | 2.1mm DC power jack for use with included external |
| power supply. |
|
|
Power Consumption: | 3W |
|
|
Dimensions (HWD): | 1.49” x 5.70” x 3.85” (38cm x 14.5cm x 9.8cm) |
|
|
Weight: | 1.5 lbs. (0.68kg) |
|
|
Certifications: | • CE |
| • UL |
| • FCC class B, part 15 |
| • RoHS/WEEE compliant |
|
|
Safety Instructions
Please read these instructions before using your AMX Solecis device. Failure to comply with these instructions could result in fire, electrical shock, personal injury, death, or damage to the equipment.
Liquid SpillsDo not set drinks on top of the unit or immerse the unit in liquid.
Do Not DisassembleThis device contains no user serviceable parts. All servicing must be performed by a qualified service technician.
For Safety Reasons•Do not place the unit on an unstable surface.
•Do not use near water or sources of heat.
•Use only recommended attachments.
•Use the type of power supply as specified.
Unplug the power to the unit and refer servicing to qualified personnel under the following conditions:
•If liquid has been spilled or the unit has been exposed to rain or water.
•If it does not operate normally when the operating instructions are followed or if it exhibits a distinct change in performance indicating a need for service.
•If the unit has been dropped or the cabinet damaged.
Connections
Connect the RGBHV and Audio sources to the Input sockets on the front panel of the unit.
•The RGB inputs are 75 ohm terminated and the audio input 47Kohm termi- nated. The video outputs are fully 75 ohm driven and the audio balanced.
•For unbalanced systems use the + and Gnd terminals.
Note: It is imperative that the input sources are fully compatible with the display and sound devices.
The unit may now be powered.
Power / Video Indication (“Active” LED)
•When the unit is powered without the RGBHV input connected, the Active indicator will be Red.
•When a signal source is applied, the indicator will turn Green.