AMX instruction manual PCS2 Programming

Operation and Programming

!A one- or two-second delay.

!Verification of status changes.

During transitions between states, the PCS may take 1 to 2 seconds to stabilize and its output indication may be incorrect. Failure to observe this delay may cause the Axcess, Axcent2, or Axcent3 system to repeatedly cycle power on the unit being sensed.

PCS2 Programming

When connecting a unit/system to the PCS2, be aware that a 1 or 2 second PCS2 circuitry stabilization consideration must be accounted for.

During transitions between states, the PCS2 may take 1 to 2 seconds to stabilize and its initial output indication may be incorrect. Failure to account for this possible de-lay may cause the Axcess, Axcent2, or Axcent3 system to repeatedly cycle power on the unit being sensed.

12 PCS and PCS2 Power Current Sensors