Installation Sheet
RDA-ENC8W 8-Module In-Wall Enclosure
The
Install only UL approved models (see the UL Number Cross Reference to AMX Lighting ID table on page 2) except
The unit supports up to 24 dimming channels per unit. This enclosure is UL and
| 14.37" | 15.25" |
|
|
|
|
|
|
|
|
| ||||||||||
SIDE VIEW |
|
|
|
|
|
| (387.35 mm) |
|
|
|
|
|
|
| |||||||
(365.00 mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
(with case cover) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
2.25" (57.15 mm)
SIDE VIEW
37.3"
(947.4 mm)32.5"
(825.5 mm)
7.5"
(190.5 mm)
BOTTOM VIEW (with case cover)
SIDE VIEW
Top, side, and bottom views are the same for this enclosure.
Metallic stud mounting flap
3.25"
(82.55 mm) - located within the wall
BOTTOM VIEW (without case cover)
FIG. 1 Top, bottom and front views of the RDA-ENC8W enclosure
Installation Instructions:
• For indoor use only. |
• Mount on vertical surface only. |
• Maintain 16" (406.40 mm) minimum clearance above and below the |
enclosure. |
• Route class 1 conductors through upper conduit knockouts. |
• Route class 2 conductors through lower conduit knockouts. |
Radia enclosures must be mounted on a vertical surface with a minimum of 12" (304.8 mm) clearance above and below the enclosure.
A to B
Top slot
• Use 75°C (167°F) copper conductors only. | |
• Supports up to 24 dimming channels per unit (4 | |
• Install filler plate | |
• | Install only UL approved modules (see the UL Number Cross Refer- |
| ence to AMX Lighting ID table on page 2) except |
|
|
• | Instals within 16" (406.40 mm) centered studs or surface mount. |
• Inserts 3.25" (85.09 mm) into wall to hide conduit (Knockouts | |
| included). |
• Projects 4.25" (107.95 mm) away from wall for ventillation. | |
Enclosure Weight:
•
Dimensions between center lines (from FIG. 2):
C to D
Configuration for right and left mounting brackets for all Radia enclosures.
Maximum mounting screw size: #12
C to D
G to H
E to F
RDA-ENC8W:
•A to B = 15.25" (387.35 mm) - Surface mounting
•C to D = 6.00" (152.40 mm) - Stud mounting
•E to F = 32.5" (825.50 mm) - Surface mounting
•G to H = 28.00" (711.20 mm) - Stud mounting
Bottom slot
