AMX specifications Installation Sheet, RDM-ZC Zero Cross Module 2400 W

Models: RDM-ZC

1 2
Download 2 pages 52.86 Kb
Page 1
Image 1

Installation Sheet

RDM-ZC Zero Cross Module 2400 W

The RDM-ZC Zero Cross Module is a 2400 W zero-cross relay built for long term, reliable switching of electronic fluorescent ballasts, electronic trans- formers and incandescent lamps. It is designed for use with the RDA series of enclosures, in an AMX Lighting™ modular digital dimming system. The RDM-ZC module's 120, 240, and 277 VAC ratings are CE, UL, and C-UL approved.

Mounting points

Line in (hot)

High-voltage

Load out

connections

Zero cross relay

Low-voltage control wiring: 4-pin connector to AMX Lighting master controller

FIG. 1 RDM-ZC

RDM-ZC UL and C-UL Ratings

120-277 VAC, 50/60 Hz, 2400 W

240/277 VAC, 50/60 Hz, 2400 W

Suggested Switched Loads

Incandescent

Electronic transformers

HID ballast

Electronic and magnetic ballast

Specifications

Dimensions (HW): 10.00" x 2.75" (25.40 cm x 6.99 cm)

Non-phase dependant

Use wires rated at 75°C (167°F)

Torque terminals to 7 in-lbs. (0.8 N/M)

Max. wire size: 10 AWG (4 mm²)

Wire stripping length: 0.28" (7 mm)

Weight: 1.5 lbs. (0.68 kg)

BTU/hr: 150

Control current: 45 mA @ 12 VDC

Caution: Pre-Installation Notes

This module may require extra power from the AXlink connection or an external power supply connected to the control card.

Connecting the RDM-ZC to the AMX Lighting Master

Pin 4 (GND)

Pin 3 (RLY)

Pin 2 (DIM)

Pin 1 (+12 V)

RDM-ZC 4-pin module connector

3(-)

1 (+)

4-pin plug from RDM series module

NOTE: The 4-pin plugs from the module connector to

the 4-pin connector on the master (black plug cover facing up).

FIG. 2 RDM-ZC connections

Lighting Application Drawing

All neutrals are common to the Neutral block in the enclosure. Provide a separate neutral for each load.

 

Neutral

Zone 1

 

Line in (HOT)

Load

 

 

Incandescent track

 

 

lighting

 

 

Fluorescent Ballast

 

 

BALLAST

Circuit breaker

Neutral

panel

 

 

Load

 

 

 

 

Neutral

 

 

Load

 

 

Neon lights

 

 

(cold-cathode, on/off)

FIG. 3

RDM-ZC wiring configuration

 

All Class 1 wiring must be connected to proper terminals.

All control wiring must be connected to proper terminals.

Disconnect power while installing or connecting the unit.

Keep top and bottom air vents clear at all times.

Test loads for shorts before connecting.

Use low voltage wires with a 300 volt rating or greater.

Use field installed copper conductors.

All electrical ratings are for continuous duty.

For indoor use only.

Page 1
Image 1
AMX specifications Installation Sheet, RDM-ZC Zero Cross Module 2400 W

RDM-ZC specifications

The AMX RDM-ZC is an advanced armored vehicle designed to provide unrivaled protection and tactical versatility on modern battlefields. As a member of the AMX family, the RDM-ZC stands out due to its unique combination of mobility, firepower, and state-of-the-art technology, making it an optimal choice for both combat and reconnaissance missions.

One of the most notable features of the AMX RDM-ZC is its armored chassis, crafted from composite materials that offer a high level of protection against anti-tank weapons and small arms fire. The vehicle is designed to withstand ballistic threats and explosive devices, providing its crew with a safe operational environment. It also includes modular armor systems that can be upgraded based on mission requirements.

The RDM-ZC is powered by a robust and efficient engine, giving it impressive mobility across various terrains. This enables vital quick deployments and rapid maneuvering, essential in both urban combat and off-road scenarios. The vehicle's advanced suspension system allows it to traverse difficult landscapes, ensuring stability and control even in challenging situations.

Equipped with cutting-edge technology, the AMX RDM-ZC features integrated communication systems that allow for real-time data sharing between units. This connectivity enhances situational awareness and aids in effective command and control. Furthermore, the vehicle supports advanced sensors and reconnaissance tools, which provide vital intelligence support during operations.

In terms of offensive capabilities, the RDM-ZC comes with a versatile weapon system that can be customized according to mission needs. It can be equipped with a variety of armaments, including machine guns, automatic cannons, and missile systems, making it adaptable for different combat scenarios. The vehicle's fire control systems ensure precision targeting, enhancing its effectiveness in combat situations.

The interior of the RDM-ZC is designed to optimize crew efficiency, featuring ergonomic controls, ample space, and advanced displays for easy operation of the vehicle’s systems. The crew compartment is configured to accommodate rapid responses to dynamic battlefield conditions.

Overall, the AMX RDM-ZC represents a significant advancement in modern armored vehicle design, combining protection, firepower, and technology to meet the demands of contemporary warfare. Its adaptability and resilience make it a valuable asset for military forces worldwide, capable of performing a multitude of roles in diverse operational environments.