PCI Gigabit Ethernet Adapter |
|
Quick Installation Guide | Version 1.0 |
Thank you for purchasing PLANET PCI Gigabit Ethernet adapter. It is a 10/100/ 1000Mbps Ethernet adapter for PCI local
Package Content
x 1 | |
Quick Installation Guide | x 1 |
Drivers Diskette | x 1 |
Hardware Installation
Step 1: Turn off the power of the PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty,
Step 5: Carefully insert the PCI Gigabit Ethernet Adapter into the chosen slot and press firmly with proper push to ensure it is fully seated in the slot.
Step 6: Secure the PCI Gigabit Adapter with the screw you saved in step 4.
Step 7: Replace the PC cover.
Step 8: Power on your PC and refer to next section to install driver.
Please do not install the PCI Gigabit Ethernet Adapter in a shared PCI slot. Avoid any PCI slot next to an ISA slot
NOTE: because this is often a shared slot and does not support bus mastering. Please refer to the user’s manual of the
motherboard for the information.
Installation on Windows 98/Me/2000
The following installation operates under Windows 2000. NOTE: Procedures will be similar for Windows 98/Me.
1. After insert
2. Please select the first option and click “Next” to continue.
3. Select “Specify a location” and click “Next”.
4.Please click “Browse” to find the driver location. (Assume “A” is your Floppy, the driver can be found in A:\Win2000). After find out the driver, please click “OK” to continue.