Anchor Audio AN135BK Mounting Brackets, Architects’ Specification, BACK PANEL OF AN-135+

AN-135+ Speaker Monitor Owners Manual

MADE IN USA

SIX YEAR WARRANTY

Architects’ Specification

The speaker shall be an Anchor AN-135+ or equivalent. The general construction shall include an injection- molded case, one 4.5” Neodymium woofer and input terminations consisting of both 3.5 mm and 1/4” phone.

The maximum speaker dimensions shall not exceed 5.25” high, 8.4” wide and 9” deep. The maximum weight shall be 3.5 pounds.

The case shall be formed by injection-molded ABS, and shall have a finish of black or white.

The speaker has the ability to be mounted on walls, ceilings, equipment racks and speaker stands with appropriate hardware and accessories.

Mounting Brackets

SB-3BK+	SB-360BK+
40° tilt bracket	360° swivel bracket
A multi-purpose bracket used	A multi-purpose bracket used for
for mounting the AN-135+ to	mounting the AN-135+ to a wall
a wall or ceiling.	or ceiling.

BACK PANEL OF AN-135+

LINE IN/LINE OUT

(3.5 MM)

NOTE: When connecting multiple AN-135+ units (daisy chaining) stereo cable

MUST be used to avoid interference.

LINE IN

(1/4” PHONE)

POWER ON

Waste electrical and electronic products must not be disposed of with
household waste. Please recycle where facilities exist. Check with	2
your Local Authority or Retailer for recycling advice.