care and servicing of your andis Clipper blades

Blades should be oiled before, during, and after each use. If your clipper blades leave streaks or slow down, it’s a sure sign blades need oil. The clipper should be held in the position shown in Figure F to prevent oil from getting into motor. Place a few drops of Andis Clipper Oil on the front and side of the cutter blades (Figure G). Wipe excess oil off blades with a soft dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean the excess hair from your blades by using a small brush or worn out tooth brush. To clean the blades we suggest to immerse the blades only into a shallow pan of Andis Clipper Oil, while the clipper is running. Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper OFF and dry blades with a dry cloth and start clipping again.

If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. Proceed to slide the upper blade to one side, without loosening the tension spring or moving the upper blade completely out from under the tension spring (See Figure H for position of blade). Wipe the surface between the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring (Figure H). Now slide the upper blade to the opposite side of the lower blade and repeat this process. After completing this procedure, slide the upper blade, centering it over the lower blade. Handle or store your Andis Clipper with the blades down so excess oil will not run into the clipper case.

changing the blade DRIVE assembly

If your clipper blades no longer cut properly (be sure to try more than one blade, since the blade currently being used may be dull), it could be that your blade drive assembly needs replacement. Please contact an Andis Authorized Service Station for replacement.

servicing of a double-insulated clipper

In a double-insulated clipper, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated clipper, nor should a means for grounding be added. Servicing a double-insulated clipper requires extreme care and knowledge of the system, and should be done only by an Andis Authorized Service Station. Replacement parts must be identical to those parts being replaced. A double-insulated clipper is marked by the words

6

Page 5 Page 7
Page 6
Image 6
Andis Company MBG-2 manual Care and servicing of your andis Clipper blades, Changing the blade Drive assembly
Page 5 Page 7

MBG-2 specifications

The Andis Company MBG-2 is a versatile, powerful clipper designed for professional groomers and barbers. Known for its exceptional performance and reliability, the MBG-2 stands out in the competitive grooming tool market. This clipper is meticulously engineered to handle a variety of coat types, making it an indispensable tool for grooming professionals.

One of the main features of the Andis MBG-2 is its powerful motor, which operates at a high speed to ensure efficient cutting without compromising on quality. The clipper is equipped with a quiet, heavy-duty, and maintenance-free rotary motor, which not only enhances performance but also makes it suitable for sensitive pets and customers who might be startled by louder clippers. This motor capability allows for a smooth and seamless cutting experience, reducing the time and effort required to achieve a perfect groom.

In terms of design, the MBG-2 boasts a lightweight and ergonomic body that enables easy maneuverability and reduces hand fatigue during prolonged use. The soft-grip housing ensures a comfortable hold, allowing users to maintain precision while working. Furthermore, the clipper's sleek design is not just about aesthetics; it contributes to better control and accuracy when clipping various hair lengths and styles.

The MBG-2 also features adjustable blade settings, allowing professionals to customize their cutting lengths. This flexibility makes it ideal for different grooming tasks, whether it’s giving a close shave or trimming longer hair. The blades are crafted from high-quality stainless steel, ensuring durability and longevity. They are designed for easy removal and cleaning, facilitating a hygienic grooming environment.

In addition to its impressive features, the Andis MBG-2 incorporates advanced technologies like the single-speed function and a detachable blade mechanism, which enhances convenience and efficiency. The snap-on design of the blades makes switching between different blade sizes a breeze, allowing groomers to adapt quickly to varying grooming needs.

In conclusion, the Andis Company MBG-2 clipper is a powerful, efficient, and user-friendly grooming tool that meets the demands of professional groomers and barbers. With its high-speed motor, ergonomic design, and versatile blade system, it is designed to deliver outstanding results across a range of grooming applications. Whether for professional use in salons or home grooming, the MBG-2 is a reliable choice for anyone looking to achieve a polished and professional finish.
Top Page Image Contents