K. Impellor
1.Discontinue power to the dryer.
2.Remove the left side panel to access the fan shaft mount assembly.
3.Remove the two (2) left handed jam nuts that hold the impellor to the fan shaft.
4.Remove the impellor and the washers and the key.
5.Replace the impellor, key, washers, left handed jam nuts, and the side panel.
6.
L. Lint Drawer Assembly
To Replace Lint Screen
1.Pull out lint drawer.
2.Remove lint screen from lint drawer.
3.Drop new lint screen in place.
4.Slide lint drawer back into dryer.
To Replace Lint Drawer Switch
1.Disconnect power to dryer.
2.Remove lint drawer and lint door.
3.Disconnect both
4.Remove the four (4) screws holding the lint switch cover on.
5.Remove lint switch cover and disconnect the two (2) terminals of the switch.
6.Remove switch by pressing tabs together and push switch out.
7.Install new switch by reversing procedure.
35
