FRYER OPERATING INSTRUCTIONS (Continued)

LIGHTING PROCEDURE

NOTE: The gas line of a new fryer installation may contain a considerable amount of air which will hinder immediate lighting. You may have to press in the control knob as long as several minutes before the pilot flame burns steadily.

1.Open the front door and ensure that the fryer’s thermostat knob is set to OFF.

2.Open the gas supply line inlet valve to the fryer by aligning the gas valve handle with the gas line piping.

3.Turn the gas control valve knob to align the PILOT setting with the valve mark. Figure 6 shows the possible control knob positions.

4.Press, and hold down, the valve control knob to allow pilot gas to flow. Apply a lighted

match to the end of the pilot burner, until the pilot flame lights.

NOTE: A butane lighter may also be used to light the pilot flame.

Continue holding down the control knob for at least 30 seconds until the pilot flame burns steadily, without going out.

5.Release the control knob and observe that the pilot flame remains lighted.

6.Turn the gas control valve knob to align the ON setting with the valve mark.

7.Turn the thermostat knob to the desired temperature. Observe that the fryer’s main burners light to heat the kettle.

Valve

M a r k

I

L

OT

 

 

 

 

P

 

 

ON

OFF

OFF

Valve

M a r k

O

T

ON

 

 

 

L

 

OFF

 

I

 

P

 

PILOT

Valve

M a r k

ON

 

OFF

 

 

 

 

P

 

T

O

L

I

 

 

 

 

 

 

 

ON

SHUTDOWN PROCEDURE

NOTE: Shutdown is recommended at the end of a workday or whenever no frying is scheduled for a period of several hours. To prevent damage, the fryer MUST also be shutdown whenever there is no shortening in the kettle.

1.Turn the thermostat knob to OFF.

2.Turn the gas control valve knob to align the PILOT setting with the valve mark. Observe that the main burners’ flames go out.

3.Press down and turn the gas control valve knob to align the OFF setting with the valve mark.

Observe that the pilot flame goes out.

NOTE: For extended periods of non-use or when servicing the fryer, close the gas supply line inlet valve to the fryer by turning the gas valve handle cross-wise with the gas line piping.

Figure 6. Gas Control Valve & Knob Positions

12

Page 12
Image 12
Anetsberger Brothers 14VFS warranty Fryer Operating Instructions, Lighting Procedure, Shutdown Procedure

14VFS, 14VF specifications

Anetsberger Brothers, a prominent name in the field of precision machining and fabrication, has made significant contributions to various industrial applications. Among their notable innovations are the 14VFS and 14VF models, which stand out for their remarkable features, advanced technologies, and exceptional performance.

The 14VFS model is engineered for versatility and efficiency, making it ideal for a wide range of manufacturing requirements. It boasts a robust design, ensuring durability while accommodating varied operational demands. One of its main features is the high-precision spindle, which allows for meticulous machining and tight tolerances. This is crucial in industries that require intricate components, as it ensures each part meets stringent quality standards.

In addition to its precision capabilities, the 14VFS integrates state-of-the-art CNC technology. This sophisticated control system enables users to program complex machining tasks easily, leading to increased productivity and reduced setup times. The user-friendly interface simplifies operation, making it accessible for both experienced machinists and newcomers alike.

On the other hand, the 14VF model emphasizes speed and performance. Equipped with powerful motors and a high-speed spindle, the 14VF is designed for rapid production cycles without compromising on quality. This model excels in high-volume manufacturing settings, delivering consistent results while minimizing downtime.

Both models feature advanced cooling systems that maintain optimal temperatures during operation, preventing overheating and extending the lifespan of the machinery. The Anetsberger Brothers’ commitment to innovation is evident in the incorporation of energy-efficient technologies, which not only reduce operational costs but also promote environmental sustainability.

Additionally, the machines are designed with user safety in mind. They include various safety features, such as emergency stop buttons and protective enclosures, ensuring a secure working environment.

Overall, the 14VFS and 14VF models from Anetsberger Brothers represent a blend of efficiency, precision, and safety. Their advanced technologies and thoughtful design make them invaluable assets in the manufacturing industry, catering to the needs of various sectors while ensuring optimum performance and reliability. These machines epitomize the company's dedication to delivering high-quality solutions for modern industrial challenges.