REPLACING THE FILTER PAPER
If the filter paper becomes torn, or if the time to filter the oil from one unit becomes excessive, it is time to replace the Filter Envelope.
!
DANGER
!
Make sure the filter pan has cooled completely to room temperature before
attempting to change the paper.
1.Disconnect the oil return line from the pump.
2.Unplug the cord from the receptacle on the side of the cabinet.
3.Pull the filter unit from the cabinet.
4.Disconnect the line from the pump to the filter screen.
5.On the Filtronic II models, pivot the motor assembly up out of the way.
6.Remove the filter cover. Use lift out handle to remove screen assembly. Place on a clean surface for disassembly.
7.Detach
8.Detach knurled retaining nut from fitting in screen.
9.Remove filter envelope clip from end of filter screen and folded back end of envelope .
10.Remove filter envelope from filter screen.
WARNING
The oil soaked filter envelope may still be very hot and could cause burns.
11.Clean the filter pan, filter screen and all components thoroughly using a solution of hot water and detergent. Make sure that all food and breading particles are removed from the pan and from the filter screen.
12.Dry the pan, the screen and all components completely before starting to reassemble.
13.Follow instructions under FILTER UNIT PREPARATION to install new filter envelope.
7
