INSTALLATION:
1.Install the HCP-850 PSU into eith er the top or bottom of your case with the four screws provided. Refer to your case manual if you are unsuree where the power supply should be installed.
2.Install the HCP-850 PSU into your case with the four screws provided.
3.Connect the 24-pin main power connector to your motherboard. If your motherbooard uses a 20-pin connector, detach the 4-pin attachhment on the 24-pin connector.
Note: The detachable 4-pin sectionn cannot be used in place of a 4-pin +12V connector.
4.Connect the 8-pin or 4+4-pin connnector for the CPU. If your motherboard has an 8-pin soccket with a cover on some of the openings, we recommmend that you remove the cover and use the 8-pin connector.
Note: Please also refer to your motherboard user’s manual for any special instructions.
