Attached to the power supply, you'll find the following:
Picture 1
1.A main power supply unit with five 6-pin output sockets, for use with the wire sets to power your drives and other peripherals.
2.A 4+ 4 pin +12V connector (Neo HE500 and Neo HE550 only) or 4-pin +12V connector (Neo HE380 and Neo HE430 only).
3.A 24-pin configurable main power connector with detachable 4-pin section for 20-pin applications.
Advanced Cable Management Wire Set
4.One Y-adapter with one standard 4-pin Molex peripheral connector at one end and two female Floppy power connectors at the other end.
5.For Neo HE380 and Neo HE430: one set of wires with a 6-pin PC I Express graphic card connector at one end and a 6-pin PSU connector at the other end.
For Neo HE500 and Neo HE550: two sets of wires with 6-pin PC I Express graphic card connectors at one end and a 6-pin PSU connector at the other end.
6.Two sets of wires with three standard 4-pin Molex peripheral connectors at one end and a 6-pin PSU connector at the other end.
7.Two sets of wires with two SATA drive connectors at one end and a 6-pin PSU connector at the other end. Note: The SATA connectors include a +3.3V output so you can power the latest SATA devices.
