![](/images/new-backgrounds/1294401/29440123x1.webp)
USB Connection
•The USB specification limits the length of the USB cable to 5 meters (about 16 feet), therefore the
•The USB port on the computer must be USB 2.0 or higher (“high speed”). The device will not work on USB 1.1.
•Plug directly into one of the computer’s USB ports. Do not go through a hub.
•Note that the USB cable plugs into the
Input Connections
•Dynamic or electret condenser microphones can be used with the
•The
•Line level devices, such as video conferencing systems or telephone line interfaces may be
connected to the
•To connect unbalanced (single ended) devices, use an appropriate cable, such as XLR male to RCA male. These cables connect pins 1 and 3 of the XLR together, which grounds one of the 2 balanced inputs. We recommend keeping unbalanced connections to about 6 feet maximum.
Monitor Connections
•The monitor outputs are unbalanced (single ended) line level (2VRMS max). They are intended to connect to telephone line interfaces, video conferencing systems, or PA amplifiers.
•The loudness level of the monitor output can be adjusted with the slider control in the Antex Mixer Program.
•Use caution when connecting this or any other device to the public telephone network. Do not put too loud a signal level into the phone line.
This could damage telephone equipment and/or be painfully loud to the person on the other end of the phone line.
•Any combination of the 4 inputs may be independently routed to the monitor outputs using the Antex Mixer Program. When connecting someone by phone, the caller would
21 |
| 22 |
|