AOC 2217PWC user manual Drivers, LED Indicators, Status LED Color, Camera Software, Windows

	OSD Setup
	H.Position		0-100	Adjust the verticalposition of OSD
	V.Position		0-100	Adjust the horizontal position of OSD
	Timeout		0-100	Adjust the OSD Timeout
	Language			Select the OSD language
	Extra
	Input Select		Digital	Select Digital Sigal Source as Input
			Analog	Select Analog Sigal Source as Input
	Auto Config		yes or no	Auto adjust the picture to default
	Reset		yes or no	Reset the menu to default
	DDC-CI			Turn ON/OFF DDC-CI Support
	Information			Show the information of the main image and sub-image source
LED Indicators
Status		LED Color
Full Power Mode		Green or Blue
Active-off Mode		Orange or red
Camera Software

. There is webcam application software in attached CD, please click " here" and download to your computer for customization.

5. Drivers

Windows 2000

1.Start Windows® 2000

2.Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.

3.Double click on the 'Display' Icon.

4.Select the 'Settings' tab then click on 'Advanced...'.

5.Select 'Monitor'

-If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.

-If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.

6.Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.

7.Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'.

8.Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).