AOC 2217PWC user manual Product Information, Specifications

	∙ The Computer Video Card should be snugly seated in its slot.
	∙ Make sure the monitor's video cable is properly connected to the computer.
	∙ Inspect the monitor's video cable and make sure none of the pins are bent.
	∙ Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing
	the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED,	∙ Inspect the monitor's video cable and make sure that none of the pins arebent.
	∙ Make sure the monitor's video cable is properly connected to the computer.
GREEN, or BLUE)
Screen image is not centered or sized	∙ Adjust H-Position and V-Position or press hot-key (AUTO).
properly
Picture has color defects (white does not	∙ Adjust RGB color or select color temperature
look white)
Horizontal or vertical disturbances on the	∙ Use win 95/98 shut-down mode Adjust CLOCK and FOCUS or perform hot-key (AUTO-key )
screen

7. Product Information

Specifications

	Model number	2217Pwc
	Driving system	TFT Color LCD
	Viewable Image Size	548mm diagoanl
	Pixel pitch	0.277mm(H) x 0.277mm(V)
LCD Panel
	Video	R, G, B Analog lnterface & Digital Interface
	Separate Sync.	H/V TTL
	Display Color	16.7M Colors
	Dot Clock	170 MHz
Resolution	Horizontal scan range	30 kHz - 83 kHz
	Horizontal scan	464.94mm
	Size(Maximum)
	Vertical scan range	56 Hz - 75 Hz
	Vertical scan Size(Maximum)	290.58mm
	Optimal preset resolution	1680 x 1050 (60 Hz)
	Highest preset resolution	1680 x 1050 (60 Hz)
	Plug & Play	VESA DDC2B/CI
	Input Connector	D-Sub 15pin & DVI-D
	Input Video Signal	Analog: 0.7Vp-p(standard), 75 OHM, Positive & DVI-D Digital Interface (TMDS)
	Power Source	100~240VAC, 47~63Hz