AOC 2218PH user manual Select HDMI sigal source as input Only, and sub, LED Indicators

Demo	on or off	Disable or Enable Demo
Picture Boost
Frame Size	14-100	Adjust Frame Size
Brightness	0-100	Adjust Frame Brightness
Contrast	0-100	Adjust Frame Contrast
Hue	0-100	Adjust Frame Hue
Saturation	0-100	Adjust Frame Saturation
Position	H. position	Adjust Frame horizontal Position
	V.position	Adjust Frame vertical Position
Bright Frame	on or off	Disable or Enable Bright Frame
OSD Setup
H.Position	0-100	Adjust the verticalposition of OSD
V.Position	0-100	Adjust the horizontal position of OSD
Timeout	5-120	Adjust the OSD Timeout
Transparence	0-100	Adjust the transparence of OSD
Language		Select the OSD language
Extra
	Auto	Select to Auto Detect input signal
Input Select	Analog	Select Analog Sigal Source as Input
	HDMI	Select HDMI sigal source as input (Only		for the
		models with HDMI input)
Auto Config	yes or no	Auto adjust the picture to default
Image Ratio	wide or 4	Select wide or 4:3 format for display
DDC-CI	yes or no	Turn ON/OFF DDC-CI Support
Information		Show the information of the main image	and sub-
		image source
Reset

Reset

yes or no

Reset the menu to default

Exit

Exit

Exit the main OSD

Notes:

1)If the product has only one signal input, the item of "Input Select" is disable to adjust.

2)If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disa 3)One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingl

LED Indicators

Status	LED Color
Full Power Mode	Green or Blue
Active-off Mode	Orange or red

How to use i-Menu software

Installation

Welcome to use ￿i-Menu￿software by AOC. i-Menu makes it easy to adjust your monitor display setting by menus on of OSD button on the monitor. Pleasehereclicktosetup the software. To complete installation , please follow the install