AOC 712SI installation instructions Plug and Play, Plug & Play DDC2B Feature

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additiona information about its display capabilities.

The DDC2B is a bidirectional data channel based on the I†C protocol. The host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When there is no video input signal this monitor, following a time-out per will automatically switch to an OFF mode. This reduces the monitor’s inter power supply consumption. After the video input signal is restored, full p is restored and the display is automatically redrawn. The appearance i similar to a "Screen Saver" feature except the display is completely off. display is restored by pressing a key on the keyboard, or clicking the mous

13