AOC 712SI Controls and Connectors Video Cable, Connecting Cables AC Power Cord Sub Cable

CONTROLS AND CONNECTORS

VIDEO CABLE

Connecting the Signal Cable:the LCD monitor comes with a built-in signal cable. Plug the signal′scable15-pin connector into the computer’s VGA port and tighten the two screws on the cable connector.

Connecting the Power Cord:Connect the power cord into your LCD

monitor￿s power input socket, and then plug the other end into a 3-pin A power outlet. The power cord may be connected to either a wall power outle or the power outlet socket on your PC, depending on the type of power cord supplied with your LCD monitor.

Caution:If the AC outlet is not grounded (with three holes), install the pr grounding adapter (not supplied).

1

Figure 2 Connecting Cables

1.AC Power Cord

2.D-Sub Cable

6