Once a channel has been found and named, use the \/ botton to select the Store prog. option.
Using the < / > buttons, select Save, Insert or Delete and press the OK button to confirm.
Swap prog : Allows to swap 2 programme numbers. Using the ^ / \/ buttons select the Prog. number option. Using the < / > buttons, select the program to be moved. Using the \/ botton, select the Swap prog option.
Using the > botton, enter the swap function.
Using the
Press the OK button to confirm, the programme numbers are swapped.
Norm : Allows to change the audio norm.
Using the \/ button, select the Norm option.
Using the < / > buttons, select the norm.
Note : the following norms are available to choose from : I for the UK and Ireland, L/LP for France and Luxembourg, D/K for Eastern Europe, the Middle East and Asia, B/G for Western Europe, Australia and New Zealand.
Skip : Allows to skip a channel.
Using the \/ button, select the Skip option.
Using the < / > buttons, select On, the channel will be skip.
Skip : Allows to skip next channel when it is on, and Using the < / > buttons,
select store prog: ok.
Repeat this procedure to skip other channels.
Fine tuning : If the picture is not clear, you can adjust the setting. Using the \/ button, select the Fine tuning option.
Using the < / > buttons to find the good tuning point.
Manual Search : Allows to launch a manual search. Using the \/ button, select the Manual Search option.
Using the < / > buttons, start the search in decreasing or increasing order.
The search will stop at the first channel found.
If you wish to memorise the channel, select Store Program option using the
^button and proceed as indicated in previous page. Otherwise, continue the search using < / > buttons.
16
