AOpen AK77-600N How You Adjust the Settings in EzClock Utility

AK77-600N OOnnlliinnee MMaannuuaall

How You Adjust the Settings in EzClock Utility

In EzClock utility, you can adjust CPU Front Side Bus (FSB), the voltage and frequency of VGA, AGP, PCI and DRAM. Besides, the CPU related information such as CPU voltage, temperature and CPUFAN rotation speed will also be displayed on this utility.

CPU Color Bars: The color bar will light on and show different colors as values change. On default values, it will show green.

On the left circle area shows Ratio, FSB and frequency information about CPU. When the values are set to factory default, the light on the top and bottom of the circle will show green and it will vary as you change these CPU settings.

CPU Ratio, FSB and frequency displaying area:

You can adjust CPU FSB here by entering preferred value.

On the right part of the panel is the section that you adjust the settings of VGA, AGP, PCI and memory. To adjust the voltage and clock frequency of those installments, you can press “-“ or “+” on corresponding items. The color parts represent the situation of values. The higher value you set, the light on the color bar goes to right and turns red. After finishing those value settings, you can press “S” button on the upper right hand corner to save changes to CMOS.

VGA, AGP, PCI and DRAM Voltage / Clock Area: Pressing “_” and “+” buttons, you can adjust the voltage and clock frequency values of onboard89 VGA, AGP, PCI and DRAM.

Control buttons:

“_” button allows you to minimize the utility and “X” button to close the utility. Pressing “S” button you can save the changes to CMOS.