3. | Locate the battery module handle at the top of the |
| battery face plate •. |
4. | Be careful during this |
| heavy. |
| Pull the battery module handle toward you to |
• | slide the battery module out of the UPS. |
| DO NOT pull on the battery cables or the white |
| cord. |
MOUNTING THE UPS IN THE RACK |
|
Due to its weight, two people are required to install the UPS in the rack.
| 1. | Supporting the UPS on both sides, carefully align |
|
| the unit with the rails. Use the handles Πon the |
|
| side of the UPS to support the unit. |
| 2. | Each side of the UPS has a cleat • that must |
Π|
| slide into the groove on the rails. Insert each cleat |
|
| |
|
| into its groove and slide the UPS into position. |
• | 3. | Use the four ornamental screws supplied with the |
| UPS to attach the mounting brackets to the rack | |
|
|
Π| post. Insert the screws into the top and bottom |
| |
| holes in the |
REINSTALLING THE BATTERY MODULE
1.Supporting the battery module on the bottom, align it with the opening and slide the battery module into the compartment.
2.Replace the two screws to secure the battery
module face plate.
6
