Contents
Main
Page
Contents:
4 User Guide APC Silcon 480kW 400V UPS
Introduction
1.1 Display Unit
1.0 Introduction
User Guide APC Silcon 480kW 400V UPS 5
2.0 Stop/Start UPS and Operating the External Service Bypass Panel
2.2 Start UPS (from stand-by)
2.1 Stop UPS (for stand-by)
2.3 Stop UPS (for complete power down)
Page
8 User Guide APC Silcon 480kW 400V UPS
2.4 Start UPS (from complete power down)
Page
2.5 Operating the External Service Bypass Switch (single systems)
Page
If battery has been disconnected, please refer to section 2.4.1 UPS start-up.
2.6 Operating the External Service Bypass Switch (parallel systems)
Page
Page
Page
2.7 Isolating one UPS in a Parallel Configuration for Service/Maintenance
Page
3.0 Operation
3.1 Keyboard
User Guide APC Silcon 480kW 400V UPS 19
3.2 Display of Measured Values
Time cannot be displayed from the Remote Display.
3.3 Using the Remote Display
3.4 Economy Mode
22 User Guide APC Silcon 480kW 400V UPS
4.0 Parameter Settings
4.1 Programming Keys
4.2 Switching to Bypass Operation
Page
User Guide APC Silcon 480kW 400V UPS 25
5.0 Alarms and Events
5.2 Displaying the Event Stack
5.1 Displaying the Alarm Stack
5.3 Possible Alarms
Page
5.4 Rectifying Alarm Messages
5.5 Parallel Operation Alarms
Maintenance & Testing
User Guide APC Silcon 480kW 400V UPS 29
6.0 Maintenance & Testing
6.1 Fan
6.2 Battery Monitoring Test
Maintenance & Testing
Warranty
User Guide APC Silcon 480kW 400V UPS 31
7.0 Warranty
7.1 APC Silcon UPS Limited Factory Warranty
32 User Guide APC Silcon 480kW 400V UPS
How to Contact APC
8.0 How to Contact APC
APC Corporate
APC Denmark