Main
2 User Guide APC Silcon 60-80kW 208V/480V UPS
Contents:
4 User Guide APC Silcon 60-80kW 208V/480V UPS
Introduction
1.1 Display Unit
1.0 Introduction
User Guide APC Silcon 60-80kW 208V/480V UPS 5
2.0 Stop/Start UPS and Operating the External Service Bypass Panel
2.2 Start UPS (from stand-by)
2.1 Stop UPS (for stand-by)
6 User Guide APC Silcon 60-80kW 208V/480V UPS
2.3 Stop UPS (for complete power down)
2.4 Start UPS (from complete power down)
8 User Guide APC Silcon 60-80kW 208V/480V UPS
2.5 Operating the External Service Bypass Switch (single systems)
Page
If battery has been disconnected, please refer to section 2.4.1 UPS start-up.
2.6 Operating the External Service Bypass Switch (parallel systems)
Page
Page
Page
2.7 Isolating one UPS in a Parallel Configuration for Service/Maintenance
Page
18 User Guide APC Silcon 60-80kW 208V/480V UPS
3.1 Keyboard
3.0 Operation
3.2 Display of Measured Values
Please note mains = utility
20 User Guide APC Silcon 60-80kW 208V/480V UPS
3.4 Economy Mode
3.3 Using the Remote Display
4.0 Parameter Settings
User Guide APC Silcon 60-80kW 208V/480V UPS 21
4.1 Programming Keys
4.2 Switching to Bypass Operation
Page
24 User Guide APC Silcon 60-80kW 208V/480V UPS
5.0 Alarms and Events
5.2 Displaying the Event Stack
5.1 Displaying the Alarm Stack
5.3 Possible Alarms
Page
5.4 Rectifying Alarm Messages
5.5 Parallel Operation Alarms
Maintenance & Testing
User Guide APC Silcon 60-80kW 208V/480V UPS 29
6.0 Maintenance & Testing
6.1 Fan
6.2 Battery Monitoring Test
Maintenance & Testing
Warranty
User Guide APC Silcon 60-80kW 208V/480V UPS 31
7.0 Warranty
7.1 APC Silcon UPS Limited Factory Warranty
32 User Guide APC Silcon 60-80kW 208V/480V UPS
How to Contact APC
8.0 How to Contact APC
APC Corporate
APC Denmark