APC 990 ,

Configuration: How to Configure the System

Symmetra MW with External Bypass Static Switch Operation Manual - 990-1377D-001 19

Note: The APC Remote Monitoring Service (RMS) will not be activated until the RMS Team

has been contacted. The contact details can be found at http://rms.apc.com.

– Enable APC RMS: Select this checkbox to start using the service. Once selected, information

about your UPS will periodically be sent to APC’s Remote Monitoring Service.

– Use Proxy: Select this checkbox if the Internet connection method uses a HTTP proxy server to

connect to the Internet.

– Proxy server address: Enter the fully qualified IP-address or fully qualified domain name of the

proxy server. If you do not know the server address or port number, contact your network

administrator.

– Proxy server port: Enter the port number of the proxy server.

– Use authentication: Select this checkbox if the proxy server requires a login. Then specify a

Proxy server login (user name) and a Proxy server password.

–Press Apply Changes to complete the changes and select arrow down to go to the next Network

Configuration screen.

Configure the APC ISX Manager Settings screen:

– Enable ISX manager discovery: Press the field

to enable the APC ISX Manager to discover

your Symmetra MW.

– Community name: Specify a valid community

name. This is automatically set to public.

– System location (optional).

– System contact (optional).

–Press Apply Changes to complete the

changes.

Press the Display Settings button on the User

Configuration screen to access the Display

Settings screen.