APC AR8162ABLK, AR8173BLK, AR8182BLK Bonding Data Cable Partitions and ladders, Grounding ladders

Bonding Data Cable Partitions and ladders

To bond NetShelter Data Cable Partitions to one another:

1.Attach one end of an 8-in ground wire  to a ground stud on the partition and secure the ground wire with two M6 washers  and an M6 nut  as shown.

NetShelter NetShelter NetShelter

ns0475c

2.Connect the free ends of the ground wires to the ground stud on the partition adjacent to the first partition, and secure the grounding wires with two M6 washers  and an M6 nut .

Grounding ladders

See “How to Ground the Ladder” in the Cable Ladder Installation with Troughs and Partitions Sheet, included with each Cable Ladder, for grounding instructions.

4 Data Cable Partitions—Installation