5Removal of Packaging

Two people to



7Contact Information

Note

If the system has to go into storage prior to installation, do not remove the packaging now. APC recommends to store the system in an indoor, temperature-controlled area, free of conductive contaminants until the time of the installation.



Remove plastic to free the ramp. Cut carefully along the edges.

roll Enclosure from pallet.

If a problem occurs, phone (1)(800)800-1272 (toll-free) for U.S./Canada, or contact our Ireland office at +353 91 70 2000 (Europe, Middle East, Africa) or go to Web Support: support@apc.com. For country-specific centers: go to www.apc.com/support/contact.

Remove



Remove

cardboard

corner

cover.

protection

 

and plastic

 

bag.

 

6 Documentation Storage



Remove bolts from the two brackets attaching the Enclosure to the pallet (one at the front and one at the back.





Place ramp, aligning velcro strips on ramp with velcro strips on front edge of pallet.

Documen- tation storage

.

Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide

Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide

Page 2
Image 2
APC SUVTRF30KH important safety instructions Removal of Packaging, Contact Information