Opening the Computer
Warning: Always turn off your computer before opening it to avoid damaging its internal components.
1Place your computer on a clean, flat surface.
2If you think your computer is in sleep, press the power button on the front of the computer to wake it.
3Shut down your computer by opening the Special menu and choosing Shut Down. Then wait five minutes for the computer’s internal components to cool down.
4If you attached a security cable through the computer’s lockable cover latch, remove the cable.
5Unplug all other cables from the computer except the power cord.
6Touch the metal PCI access covers on the back of the computer.
Latch |
|
Side | Touch the metal |
access | portion of the PCI |
panel | port access covers. |
Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer.
7Unplug the power cord.
8Lift the latch on the right side access panel.
9Gently lower the access panel until it lies flat. To avoid scratching the case, lower the panel onto a soft, clean cloth.
2 - Power Mac G4 Zip Drive
