7Remove the four screws that mount the Zip drive to the carrier and slide the drive out of the carrier.
Zip drive
Installing the Replacement Zip Drive
1Slide the replacement Zip drive into the lower bay in the drive carrier. Insert the screws from the old drive through the side holes in the carrier and tighten to secure the drive to the carrier.
2Partially insert the drive carrier into the computer. Leave room behind the assembly so you can reach the connectors.
3Connect the cables to the Zip drive and CD/DVD drive:
•Connect the middle connector on the power cord bundle to the Zip drive.
•Connect the middle connector on the ribbon cable to the Zip drive.
•Connect the end of the power cord bundle to the CD/DVD drive.
•Connect the end of the ribbon cable to the CD/DVD drive.
4. Reattach the shielding tape (if present) to the top of the carrier.
Tape
Attach the power cable and the ribbon cable to the back of the CD/DVD drive.
Attach the middle connectors on both the power cable and the ribbon cable to the back of the Zip drive.
Power Mac G4 Zip Drive - 5
