Apple 073-0624 , Closing the Computer

Power Mac G4 CD/DVD Drive - 3
2. Connect the cables to the Zip drive and CD/DVD drive:
• middle connector on the power cord bundle to the Zip drive.
• middle connector on the ribbon cable to the Zip drive.
• end of the power cord bundle to the CD/DVD drive.
• end of the ribbon cable to the CD/DVD drive.
3. Reattach the ribbon cable tape to the top of the carrier.
4. Insert the drive carrier into the computer, making sure the pegs on the bottom of the
carrier fit into the two notches in the drive shelf. (Figure 7)
5. Reinsert the four carrier mounting screws you removed earlier and tighten them to
secure the drive carrier to the chassis.
Closing the Computer
1. Raise the side access panel, lift the latch, and press the panel against the case until it
snaps securely into place.
2. Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.