1. Load envelopes until they stop, with the print side up and the sides of the flaps on the left as
shown below.
AUB260S
2. Slide the side guides against the edge of the envelope stack.
3. Set the envelope size and feed direction. Press the [Menu] key.
AUB051S
The [Menu] screen appears.
4. Press the [ ] or [ ] key to display [Paper Input], and then press the [ Enter] key.
5. Check [Bypass Size] appears, and then press the [ Enter] key.
6. Press the [ ] or [ ] key to select the envelope type, and then press the [ Enter] key.
7. Press the [Online] key.
The initial screen appears.
• Confirm that the top of the stack is not higher than the limit mark on the side guides.
Loading Paper
101
5