-- First, TURN OFF THE POWER SUPPLY.
-- Remove the cover from your IIe.
-- Discharge any static electricity on your body by touching the IIe power supply case before touching any of the components.
*Warning! Don’t ZAP your chips! There are many static sensitive components in the IIe and on the RamWorks and 2 MEG+ Memory Expander cards. Be sure that you touch the power supply case before continuing.
-- Remove the RamWorks card.
-- Carefully line up the pins on the underside of the 2 MEG+ Expander with the corresponding sockets on the chip side of the RamWorks card. Refer to the illustration below.
--Press the pins gently but firmly into the sockets until they are fully seated. (Even when it's fully seated there may still be some of the pin showing between the connectors, so don’t press too hard!)
1