- -Now, re-install the expanded RamWorks following the installation instructions in your user’s manual

Testing Your 2 MEG+

After installing the Expander card, you should test it by running the RamWorks Memory Test on the AppleWorks 2 Expander disk (Version 1.3) or the Super AppleWorks Desktop Expander disk. The test will display X’s on empty sockets and bad chips. Those sockets containing good chips will be displayed as clear rectangles.

Adding Even More Memory...

There are sixteen RAM chip sockets on the 2 MEG+ Expander which can accommodate from 1 to 2 megabytes of RAM, using groups of eight 1 megabit dynamic RAM chips.

Memory chips with the correct specifications can be obtained at some computer or electronics parts stores, or you can get them through Applied Engineering; possibly at a lower cost. Because Applied Engineering gets bulk-quantity discounts on its purchases of memory chips, we can often offer them at lower prices. We use high-quality memory chips and warrant them for 5 years. (Most electronics parts vendors sell their chips ‘as is.”) With Æ memory chips you are also assured of getting the right chips.

Memory Chip Installation

Memory on the 2 MEG+ Expander is organized into two BLOCKS, shown as A and B in the illustration below. Each block must be completely empty or completely populated with 8 D-RAM chips. It is recommended that you fill block A first, then block B. (See graphic following.)

2