MacBook Pro 15" Core 2 Duo Models A1226 and A1260 SSD Dual Drive Installation
Step 10 — Optical Drive
Step 11
Use the flat end of a spudger to disconnect the orange SuperDrive ribbon cable from the logic board, removing tape as necessary.
Remove the following 4 screws:
Two 3.3 mm silver Phillips screws on either side of the SuperDrive.
One 4.7 mm silver T6 Torx screw from the top left corner of the drive.
One 6.2 mm black Phillips screw at the top right corner of the drive. 
Lift the optical drive up and out of the computer.
© 2013 | guides.crucial.com | Page 7 of 12 |
