Apple C2h15d specifications T T I N G S T a R T E D, E C a U T I O N S

S I D E S I D E

B

G E T T I N G S T A R T E D

STARTING THE FIRST TIME

In a multiple screen configuration, most video cards will boot one screen first, thus allowing you to configure your system as you see fit. Once the appropriate drivers have been loaded, the system will re-boot and bring up both screens. You may then proceed to arrange your desktop, configure any particular environment characteristics you wish, and start up your applications.

MAINTENANCE

Liquid Crystal Displays are highly sophisticated pieces of equipment. Avoid touching the screen surface with any sort of hard object, as this may result in scratches, which will reduce the effectiveness of the display and are not covered by your warranty.

Always handle your monitor with care when moving. If you move the screens around on a frequent basis, it is also good idea to periodically check to ensure that all fittings and screws are tight.

P R E C A U T I O N S

	Carefully unpack the LCD monitors.
1	IMPORTANT:
	Handle the monitors with care so that
	pressure is not placed on the front surface of
	the LCD panel as this may result in
	permanent damage to the panel. Don’t rest
	any objects on top of the screens.
	Unpack the structure carefully.

GETTING STARTED	ON SCREEN DISPLAY MENU
STARTING THE FIRST TIME	OSD FUNCTION
PACKAGE CONTENTS	SUB-MENU FUNCTIONS
MAINTENANCE
PRECAUTIONS	OTHER INFORMATION
	WARRANTY STATEMENT(S)
UNPACKING YOUR MASS	CUSTOMER SUPPORT
MULTIPLES™	OTHER LCD INFORMATION
USING THE QUICK RELEASE	FCC INFORMATION
CONNECTING YOUR
MONITORS
OPERATION
LOCATION OF CONTROLS
SPECIFICATIONS
TROUBLESHOOTING

PACKAGE CONTENTS

Your C2H15D dual format package includes:

A dual head monitor system with integral video cables terminated with 29-pin DVI-I connector.

One universal input power supply complete with power cord.

User manual, Support Structure assembly instructions

Support Structure fasteners

Warranty Statement

Registration Card

Macintosh adapter (optional)

PRECAUTIONS

Avoid touching or applying pressure to the screen with your fingers as damage to the liquid crystal layer may occur. Wipe marks from the screen with absorbent cotton or a soft cloth. Do not use chemical cleaners.

The monitor contains high voltage parts. You may suffer serious injury if you touch these parts.

Avoid exposing the monitor to direct sunlight or another heat source. The monitor should be facing away from direct sunlight to reduce glare.

Do not place anything on the monitor that blocks the flow of air through the vent which may prevent adequate dissipation of heat.

Ensure the area around the monitor is clean and free of moisture.

Do not place heavy objects on the monitor, video cable or power cord.

If smoke, abnormal noise, or strange odor is present, immediately switch the monitor off and call your dealer. It is dangerous to continue using the monitor.

2	If base needs to be assembled refer to
	Support Structure assembly procedure on
	how to assemble base using wing nut and
	washers provided.
	If a base tray is available use this to prevent
	the unit from tipping during installation. Place
	the structure and base tray on a level surface.
3	Caution: secure base when installing LCD
	screens. To prevent the unit from tipping
	assemble screens from center out. If base
	tray is available simply slide from assembly.
	Once you’ve located the structure at a
	desired location then simply slide the LCD
	monitors onto patented ‘quick release’
	system. Ensure that the LCD panel locks in
	place.
	After confirming that all the LCD panels are
4	secured, feel free to adjust the panels to the
	desired position. Hold the LCD screen
	without applying pressure on the LCD
	surface, and adjust. Proceed to connect the

display system to your computer as detailed in this user manual. Connect monitor to appropriate cables provided.

USING THE QUICK RELEASE

To lock LCD To unlock LCD

CONNECTING YOUR MONITORS

LOCATION OF CONTROLS

FRONT PANEL REAR CONTROL PANEL

SPECIFICATION

Property

Monitor Type

Size and Weight

Description

Integrated dual screen LCD

19" x 27.0" x 10.0" (H x W x D) approximately 17 lbs (8 kg)

slide LCD in place

(A) Phillips screws

Power Requirements

Resolution (per screen, multi-scan)

Resolution (aggregate max.) Pixel Pitch

Line Voltage: 100 to 240 VAC, 50 - 60 Hz

Power: 18W (operating)

640 x 400, 720 x 400, 640 x 480, 800 x 600, 832 x 624, and 1024 x 768

2048 X 768

0.297 (H) x 0.297 (V)

		lift LCD
	locked position	depress latch to
		release LCD
‘quick release’ latch		Note: remove connector
		before depressing latch

DETAIL OF QUICK RELEASE SYSTEM

DOCKING YOUR LCD AND TIGHTENING BALL JOINT

1.Match the ‘dove tail’ to ensure that the LCD unit sits flat against the ‘ball and socket’ assembly.

2.Simply slide the two interlocking parts, while ensuring that the unit is locked in place. Now you can proceed and install the connectors.

3.To remove the LCD head reverse the procedure. To unlock the LCD unit you must depress the ‘quick release’ latch. Ensure a proper grip on the LCD to prevent it from slipping.

When removing the LCD panels make sure you counter the weight of the other LCD screens to prevent the unit from tipping. Lift the LCD panel and place on a flat surface.

4.To tighten ‘ball joint’ simply turn two Phillips screws (A), turn a quarter turn until desired position is achieved.

5.Review Detail of Quick Release System (above) for the location of the ‘quick release’ latch.

OPERATION

1.Ensure power is off before proceeding with the installation.

2.Connect the video cable marked with "A" to the first video output of your computer.

3.Similarly connect the video cable marked with "B" to the second video output of your computer.

4.Connect the output cables of the power supplies to the five pin DIN connectors.

5.Connect the power cords.

6.Turn your computer on.

7.Turn the screens on by pressing the power button located on the lower back of each monitor. Power indicator will light.

Power LightMenu Directional SelectN/A Power

INTERFACE DESCRIPTION

REAR CONTROL PANEL
Power	Turns the monitor On/Off
Menu	Displays the menu. Exits the menu or control screen.
Up/Down Select	Highlights next menu item
Increment/Decrement	(+/-) Changes the value of the selected item or
	highlights the next menu item in a submenu.
FRONT PANEL
Green light = power on	Amber light = loss of video

Color Depth

Viewing Angle

Brightness

Contrast Ratio

Screen Size and Type

Surface Treatment

User Controls

Approvals

Input Connections

Support Structure

TROUBLESHOOTING

Problem

No image on one or more screens

Screen viewing order is incorrect. Colors are not clear.

Screens will not stay in one position.

More than 16 million

H +65°/-65° V+55°/-45° typical 250cd/m2

400:1 typical

15" diagonal active matrix TFT Anti-glare and hard coatings 2H

Power on/off

On Screen Control - Menu

Select up/down Increment / decrement

FCC, CE, Entela, Energy Star Two x 29-pin DVI-I connectors Aluminum

Suggested remedies

Make sure cables are properly fastened. Check power to monitors.

Check video connection from computer to monitors.

Check seating and bus location of video card. Use known working monitor to check for signal. Re-boot the computer.

Re-install driver software.

Use driver software to re-tile monitor order. Check color settings within the O/S controls.. Check to make sure screen mounting pivots are properly fastened and tightened.