Apple Computer Monitor manual Operation, UseComputerof the remoteDisplay modescontrol

UseComputerof the remoteDisplay modescontrol

VGA	640x480	31.468 kHz	60 Hz
VGA	640x400	31.468 kHz	70 Hz
VGA	640x350	31.468 kHz	70 Hz
MAC II	640x480	35.000 kHz	67 Hz
SVGA	800x600	35.156 kHz	56 Hz
XGA	1024x768	45.000 kHz	56 Hz

When a VGA computer is connected, the selection is made automatically.

A message is displayed when the monitor does not support one of the above mentioned VGA modes.

Switch your computer to a correct display mode.

Operation

&Insert the mains plug 5 (see previous page for the illustration) supplied into the mains inlet at the back of the monitor and in the wall socket. Please, only use the supplied rim-earthed mains cord with its built-in filter.

éRemote control: remove the cover of the battery compartment. Insert the 2 batteries supplied (Type LR6AA-1.5V).

The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless in many countries batteries may not be disposed of with your household waste. Please check on how to dispose of batteries according to local regulations.

“Switch the monitor on : Press the power button B at the right side of the monitor.

A green indicator lights up and the screen comes on.

When the monitor does not receive a certain VGA signal the screen remains black.

Make sure that your PC is switched on and is in the correct display mode.

2