8
Using your mobile FM transmitter with an RDS-enabled radio receiver
To set up and use your mobile FM transmitter with
an RDS-enabled radio receiver:
1Tune your receiver to the same fre quency dis played on
the face of the transmitter (or vice-versa).If your FM
receiver is RDS enabled, the radio automatically
shows 'RDS' in its display (if no song is playing).
2Enable "AF" mode in your receiver for advanced
functionality. (See your RDS-enabled receiver
instruction manual for directions. Methods may
vary.)
3Plug the connector on the end of the cable into your
iPod.
4Start your iPod player. Your mobile FM transmitter
turns on whenever an audio signal is detected.
5The song title is automatically displayed on the FM
receiver after a few seconds.
i2i-RDS_08-400_Final revised.fm Page 8 Jan. 28, 2008