Apple MD032LL/A, ME177LL/A setup guide Choose Add Wireless Clients from the Base Station menu

Allowing Wireless Clients to Access Your Network Without Entering a Password

If your network is password-protected using WPA Personal or WPA/WPA2 Personal, you can provide wireless clients access to your network without requiring them to enter the network password.

When you allow a client access to your network, the client’s name and wireless MAC address (or AirPort ID) are stored in the access control list of AirPort Utility until you remove the client from the list. You can also provide 24 hours of access, after which time the client can no longer access your network.

When you give a client access to your wireless network, the client doesn’t need to enter the network password.

To allow a client to access your network without entering the network password:

1Open AirPort Utility, select your Time Capsule, and then choose Manual Setup from the Base Station menu. Enter the password if necessary.

2Choose Add Wireless Clients from the Base Station menu.

3 Select how you want the client to access the network:

ÂÂ Select PIN to enter the eight-digit number provided by the client requesting network access.

ÂÂ Select “First attempt” to allow network access to the first client attempting to join the network.

While the Time Capsule waits for a client to join the network, the LED glows blue.

Chapter 2   Setting Up Your Time Capsule 23