Installing the H.320 card
The H.320 card is installed in your computer by an authorized service representative. In general, it is not recommended that you remove the card. However, if the card needs to be reinstalled, follow these steps:
1Refer to the manual that came with your computer. Locate the chapter that explains how to install an expansion card. Follow the instructions carefully to remove the computer’s cover and install the card. (See the illustrations on the following pages.)
Do not replace the computer’s cover.
2Plug the connector at the end of the H.320 card’s ribbon cable into the computer’s DAV port. (The illustrations that follow show the card installed in each model of computer.)
DAV connector | Ribbon cable | H.320 card |
Power Macintosh 8100AV
3
