Apple RGB-IIB FIG, FIG, WARNING

FIG. 2

VIDEO PIN (SEE FIG. 4)

SLOT 7 (SEE FIG. 3)

7.8 JUMPER SOLDERED

APPLE-II MOTHER BOARD

FIG. 3

THE PCB TYPE

CONNECTOR

SLOT 7

4 Locate the video output connector on the rear of the computer cabinet. Directly i n

front of this connector is a short row of electrical components, and then a row of four vertical pins which are located nearest to the video jack. Connect the video cord from the RGB-IIB module to the second pin from the right end of this row, as shown in Fig. 4. Connect the end of video cord with the four pin plug of RGB-IIB

to the video pin of the APPLE-IIPLUS computer.

WARNING

It is very important that step 4 be followed exactly. Connecting the RGB-IIB video cord to any other pin in this row may damage the computer, the RGB-IIB or both.