
FIG. 4
VIDEO CORD
4P PLUG
CONNECT THE VIDEO CORD
TO THE VIDEO PIN
5 Plug the end of the connecting cable with the six pin plug into the mating six pin socket on the
6 Route the connecting through a convenient opening in the rear ‘ of the computer cabinet close to the module, and plug the eight pin end of the cable into the mating connector on the RGB- vision monitor.
7
8
Set the monitor mode
Recheck each installation operation (step 2 through 7) before processing further.
9 Replace the computer cover and turn ON the A.C. power to both the computer and the monitor.
10 Adjust the RGBvision monitor to obtain a satisfactory picture (refer to OWNER’S GUIDE).
11 If there appears any abnormality in the quality of the video display, recheck steps 2, 3, 4 & 9, particularly watching for cold solder Joints and dirty contacts. If the display is still not satis- factory, return the