￿￿ ￿ ￿ ￿ ￿ ￿ ￿￿ " ￿ ￿ ￿ ￿ ) ￿ ￿ ￿￿ ￿￿ ￿ ￿

￿

￿

￿￿￿￿￿￿￿$￿

￿￿￿￿￿￿￿#￿￿￿￿) ￿￿￿￿

In this chapter we will discuss the physical installation of NetPurifier and how to connect a browser to NetPurifier in preparation for configuration.

Installation

Location

NetPurifier should be installed in a clean, dry location located within near available hub/switch port of the network that is to be filtered.

AC Power

Connect the supplied AC Power cord to the NetPurifier and a properly grounded 115VAC outlet.

Network Connection

Connect either the supplied network cable (6ft) or your own network cable between the NetPurifier’s network connector and a port on your hub or switch. NetPurifier works on 10baseT and 100baseT networks.

Note: NetPurifier may be connected to any point in the network as long as it is on the same subnet as the network it will filter.

$￿￿￿

Page 11
Image 11
Apple Version 3 manual Installation, Location, AC Power, Network Connection