" )
Power On and Indicator Lights
After all connections are made NetPurifier may be powered on by pressing the power switch on the front of the unit. The green indicator light indicates that NetPurifier is powered on and functioning normally. The yellow light indicates disk activity.
Note: After power on, NetPurifier will take approximately two minutes before it is ready for operation.
To power off NetPurifier press the power button. All indicator lights will extinguish.
Connecting a browser to NetPurifier
Configuration of NetPurifier is done by way of TCP/IP using a Browser. The following browsers have been tested with NetPurifier.
Internet Explorer 4 or newer
Netscape 4 or newer
Opera
NetPurifier is configured from the factory for the 192.168.1.0/255.255.255.0 subnet. If your network is already using this subnet then you are ready to configure NetPurifier.
If your network is not using this subnet then you will need to configure the computer that will configure NetPurifier to temporarily reflect a static IP on the 192.168.1.x network. This is done as follows:
$$
