Ke yb o a rd C ab l e
keyboard cable 
7Disconnect the keyboard cable and lay the keyboard assembly aside.
Replacing the Keyboard Assembly
1While bracing the keyboard assembly upright on its left end, connect the keyboard cable to the interface connector on the system board.
NOTICE: Position the keyboard/track stick flex cable so it is not pinched when you replace the keyboard in the bottom case assembly.
2Insert the metal tabs at the left end of the keyboard under the edge of the bottom case assembly, and fit the keyboard into place.
3Check that the keyboard is correctly installed. The keys should be flush with the left and right surfaces of the palmrest.
4Reinstall the four screws in the holes labeled “circle K.”
Removing and Replacing Parts
25
