PRINCIPLE OF OPERATION

Withyourpurchaseofthishumidificationsystem,youhaveinvestedina humidifier thatoperates on theevaporative principle – nature’s ownwayof addingmoisture

providing optimum relative humidity (RH) throughoutthe heating season.It is verypossible that youhavequestionsconcerningyournewhumidifier– questions on what it can do for you, and what you should do to receive maximum benefits from it. This booklet is intended to answer these questions.

Nature, in producing an invigorating comfortable April day, combines just the right temperature and the right amount of moisture. Aprilaire humidifiers employ the same principle, with refinements, to give you the optimum RH for maximum allowable comfort all winter long.

The important considerations in the evaluation of a humidifier are precise control, sufficient capacity, trouble-free performance and minimum maintenance. The operating principle of your Aprilaire humidifier provides all of these advantages. Here, briefly, is the method:

Except for Models 350 and 360, the Aprilaire humidifieris installed to operate in conjunction with the heating, ventilating, air conditioning equipment (HVAC) blower motor. When the Aprilaire humidifierControl calls for humidity and the blower motor is operating, water flows to the distribution tray located at the top of the humidifier. The water is uniformly distributed across the width of the tray and through a scientifically designed system of outlets. It flows by gravity over the Water Panel® evaporator, the heart of the humidifier. Dry, hot air is moved through the moisture-laden Water Panel evaporator where natural evaporation takes place. The now-humidified air carrying moisture in vapor form (nature’s own way) is circulatedthroughout the home.

Models 350 and 360 use service hot water (140°F maximum) for a heat source, as heat is needed for evaporation. While the water going to the humidifier is hot, the flushing water to the drain will be cold. The heat is extracted during the evaporation process.

The correct water flow is determined by an orifice provided with each drain type humidifier. When the humidifier is operating, there will be a small, steady stream of water to drain, which flushes away most of the trouble-causing minerals.

Do not use the saddle valve to regulate the water flow. It is designed to be completely open or closed.

The minerals and solid residue not trapped by the replaceable Water Panel evaporator are flushed down the drain in the Models 350, 360, 500, 500M, 600, 600M, 700 and 700M. This is the most effective and least expensive method to dispose of trouble-causing minerals. The drain also eliminates the problems caused by stagnant water.

There are some homes where drain facilities are not accessible or available. For these situations, or where high water hardness is not a problem, Models 400 and 400M are designed to satisfy these applications.

Trouble-free performance and minimum maintenance are assured by the design features of the Aprilaire humidifier. All humidifier housing parts that come in contact with water are non-metal and will never rust or corrode. Neither heat nor water will affect them under normal operating conditions.

The Water Panel® evaporator, designed especially for uniform, high evaporation, and the Scale Control Insert (which encases the Water Panel) efficiently traps mineral deposits which are often the cause of damage to working parts in ordinary humidifiers. When properly maintained, no “white dust” will be distributed through the living quarters. The Water Panel evaporator is the heart of the humidifier and must be in good condition to assure high capacity trouble-free performance . It should be changed at least annually with the exception of Models 400 and 400M which should be changed at least twice per heating season.

The distribution tray incorporates a synthetic fabric liner that is designed to deliver water uniformly over the entire top surface of the Water Panel evaporator, provided the humidifier is mounted level. It is normal for some mineral deposits to form in the distribution tray as it dries out between humidification cycles. These deposits can actually help distribute water in the tray, but if they block the openings, they should be removed as described in the “Periodic Preventative Maintenance” section of this manual.

Your Digital Humidifier Control works in conjunction with your HVAC to control the operation of the humidifier. The control senses indoor RH and outdoor temperature and automatically adjusts the operation time of the humidifier to provide the optimum humidity level in the home.

The digital readout on the control displays the RH level inside the cold air return duct. RH is a measure of the amount of moisture in the air as a percentage of what the air can hold. Warm air can hold more moisture than cold air can. This reading will accurately indicate the RH in the living space when the HVAC blower is operating. Once the HVAC blower stops, the readout will not change.

The control has lights which indicate humidifier operation, when the water panel needs to be replaced and when service is required. See “Operating Instructions” for more information.

There are many humidifiers on the market. They all add moisture… with varying degrees of efficiency. None, however, offer the features, design, and performance incorporated into your new Aprilaire humidifier.

- 2 -

- 3 -

Page 3
Image 3
Aprilaire 600, 400M owner manual Principle of Operation

400, 600, 400M specifications

The Aprilaire 400 is a high-performance whole-home humidifier designed to enhance indoor air quality and provide superior comfort throughout your living spaces. As part of the Aprilaire family, known for their commitment to creating healthier environments, this model stands out due to its innovative features and advanced technologies.

One of the main characteristics of the Aprilaire 400 is its capacity to humidify homes effectively, covering an area of up to 4,000 square feet. This makes it ideal for large living spaces, ensuring that every room benefits from balanced humidity levels. The humidifier operates seamlessly with the home’s existing heating and cooling systems, requiring no additional maintenance, making it a hassle-free solution for homeowners.

A prominent feature of the Aprilaire 400 is its self-regulating technology. This unit uses a built-in humidistat that senses the moisture levels in your home and adjusts the humidification output accordingly. This ensures optimal humidity—typically between 30% and 50%—which can help reduce issues related to dry air, such as dry skin, irritated sinuses, and static electricity.

Another key benefit of the Aprilaire 400 is its evaporative design, which utilizes a water panel rather than a traditional water tank. This allows for efficient moisture dispersion, as the humidifier draws in dry air, passes it through the water panel, and releases it back into the living space as humidified air. The water panel is replaceable and designed for annual maintenance, promoting long-term functionality and hygiene.

The Aprilaire 400 also incorporates a simple installation process. With compatibility for various heating systems, including forced air and hydronic, it can be integrated into most homes without significant modifications. Its compact design is another advantage, ensuring it can fit unobtrusively in your home, maintaining the aesthetic of your space.

Overall, the Aprilaire 400 whole-home humidifier is a reliable solution for maintaining optimal humidity levels, fostering a healthier living environment, and enhancing overall comfort. With its advanced features, ease of use, and efficient operation, this humidifier is a smart investment for any homeowner aiming to improve indoor air quality and promote well-being.